Skip to main content

The automation race

2nd March 2021

Submitted by:

Sara Waddington

Caption above: Milton Guerry, President, International Federation of Robotics

 

According to the International Federation of Robotics (IFR), the average robot density in the manufacturing industry hit a new global record of 113 units per 10,000 employees. By region, Western Europe (225 units) and the Nordic European countries (204 units) have the most automated production, followed by North America (153 units) and South East Asia (119 units).

The world´s top ten most automated countries are: Singapore (1); South Korea (2); Japan (3); Germany (4); Sweden (5); Denmark (6); Hong Kong (7); Chinese Taipei (8); USA (9) and Belgium and Luxemburg (10). This is according to the latest World Robotics statistics, issued by the International Federation of Robotics (IFR).

“Robot density is the number of operational industrial robots relative to the number of workers,” said Milton Guerry, President of the International Federation of Robotics. “This level measurement allows comparisons of countries with different economic sizes in the dynamic automation race over time.”

The country with the highest robot density by far remains Singapore with 918 units per 10,000 employees in 2019. The electronics industry, especially semiconductors and computer peripherals, is the primary customer of industrial robots in Singapore with shares of 75% of the total operational stock.

“South Korea comes second with 868 units per 10,000 employees in 2019. Korea is a market leader in LCD and memory chip manufacturing with companies such as Samsung and LG on top, as well as a major production site for motor vehicles and the manufacturing of batteries for electric cars,” commented the IFR.

Japan (with 364 robots per 10,000 employees) and Germany (346 units), rank third and fourth respectively. Japan is the world´s predominant robot manufacturing country - where even robots assemble robots: 47% of the global robot production are made in Nippon. The electrical and electronics industry has a share of 34%, the automotive industry 32% and the metal and machinery industry 13% of the operational stock. Germany is by far the largest robot market in Europe with 38% of Europe’s industrial robots operating in factories there. Robot density in the German automotive industry is among the highest in the world. Employment in this sector rose continuously from 720,000 people in 2010 to almost 850,000 people in 2019.

Sweden remains in fifth position with a robot density of 274 units operating with a share of 35% in the metal industry and another 35% in the automotive industry.

“Robot density in the United States increased to 228 robots. In 2019, the US car market was again the second largest car market in the world, following China, with the second largest production volume of cars and light vehicles. Both USA and China are considered highly competitive markets for car manufacturers worldwide,” continued the IFR.

“The development of robot density in China continues dynamically. Today, China’s robot density in the manufacturing industry ranks fifteenth worldwide. Next to car production, China is also a major producer of electronic devices, batteries, semiconductors and microchips,” it concluded.

For further details, visit www.ifr.org  or see IFR video on world´s top automated countries at https://www.youtube.com/watch?v=w_kApx8C-O4

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Ron Palick, Wilson Tool

Punch, bend and stamp

Ron Palick, Wilson Tool’s global VP of sales, outlined the company’s vision, product strategy and

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington

Dirk Ritter, STOPA

A holistic view

Dirk Ritter, STOPA’s head of sales and service, outlined the company’s closer alignment with TRUMPF

Submitted by:

Sara Waddington

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Ron Palick, Wilson Tool

Punch, bend and stamp

Ron Palick, Wilson Tool’s global VP of sales, outlined the company’s vision, product strategy and

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Ron Palick, Wilson Tool

Punch, bend and stamp

Ron Palick, Wilson Tool’s global VP of sales, outlined the company’s vision, product strategy and

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington

Dirk Ritter, STOPA

A holistic view

Dirk Ritter, STOPA’s head of sales and service, outlined the company’s closer alignment with TRUMPF

Submitted by:

Sara Waddington

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Ron Palick, Wilson Tool

Punch, bend and stamp

Ron Palick, Wilson Tool’s global VP of sales, outlined the company’s vision, product strategy and

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington