Skip to main content

ECHA proposes action on microplastics

4th February 2019

Submitted by:

Sara Waddington

 

The European Chemicals Agency (ECHA) has, as requested by the European Commission a year ago as part of the EU plastics strategy, submitted a proposal for the restriction of microplastic particles that are intentionally added to mixtures used by consumers and professionals. If this is adopted, the agency claimed, it could reduce the amount of microplastics released to the environment in the EU by about 400,000 tonnes/year over 20 years.

 

The proposal covers the market placement of microplastics “on their own or in mixtures, where their use will inevitably result in release to the environment, irrespective of conditions of use”. There are also labelling labelling requirement to minimise release in uses where it is not inevitable but could occur if they are not used or disposed of properly, and reporting requirement to improve the information available.

 

“Microplastics are a growing concern to a number of human rights. The steps proposed by ECHA are necessary to help ensure present and future generations can enjoy what is their human right: a clean, healthy and sustainable environment,” said Baskut Tuncak, the UN’s special rapporteur on hazardous substances and waste.

 

ECHA noted that there is cause for concern because of microplastics’ extreme persistence and potential for adverse effects or bioaccumulation, although their long-term effects on human health and the environment are as yet little understood. It also noted that most intentionally added microplastics accumulate in terrestrial environments, mainly in sewage sludge used as fertiliser, rather than in the oceans.

 

In the proposal, microplastics are defined as synthetic polymer particles of <5 mm that resist (bio)degradation. It covers uses in many sectors, including cosmetics, detergents and maintenance, paints and coatings, construction, medical devices and diagnostics, agriculture and horticulture, and oil and gas. ECHA added that there will be associated costs but expects the restriction to be cost-effective in all sectors.

Specific transitional arrangements have been proposed for some applications. Microplastics - other than microbeads, which are already the subject of a voluntary phase-out by 2020 - will have to be substituted in detergents, waxes and polishes within five years, while in cosmetics there are different four- and six-year deadlines, other than for microbeads used in rinse-off cosmetics, which are also being phased out and have been the subject of restrictions by some individual member states.

The next steps will be a conformity check by ECHA’s scientific committees in March, then a public consultation on the dossier and scientific opinions from the agency’s Risk Assessment and Socio-Economic Analysis committees. If the proposal clears all these hurdles, it should return to the EC for a decision in early 2020.

 

Environmental NGOs broadly welcomed the measure but some regard it as too limited or lacking in urgency. Some particularly pointed to the 176,000 tonnes/year of microplastics that are unintentionally released into surface waters in the EU, mostly from road tyre wear and preproduction pellets, dwarfing the amount added intentionally.

Image: Gene Gallin, Unsplash.

Global shipbuilding markets

We analyse trends, growth patterns and drivers in global shipbuilding markets for manufacturers.

===

“The

Submitted by:

Sara Waddington

Dr Jan Antonis, InspecVision Ltd

A drive for innovation

InspecVision, a leading UK manufacturer of precision inspection systems for quality control, has achieved the

Submitted by:

Sara Waddington

TRUMPF Managing Board

A strategy for success

ISMR attended TRUMPF’s INTECH exhibition at its headquarters in Ditzingen, Germany. The company highlighted its

Submitted by:

Sara Waddington

KUKA HRC cobot

Industrial robotics markets

Industrial robots contribute to improved productivity by minimising human errors, focusing on precision and operating

Submitted by:

Sara Waddington

Blechexpo Schweisstec 2025

Meet ISMR at Blechexpo/Schweisstec

Stuttgart, Germany, will be the venue for the 17th Blechexpo international trade fair for sheet

Submitted by:

Sara Waddington

Blechexpo Schweisstec 2025

Meet ISMR at Blechexpo/Schweisstec

Stuttgart, Germany, will be the venue for the 17th Blechexpo international trade fair for sheet

Submitted by:

Sara Waddington

Riccardo Rosa, President of UCIMU

Made in Italy

Manufacturing prospects, machine tool trends and macro-economic forecasts for Italy are outlined in this article

Submitted by:

Sara Waddington

AM-manufactured part (Shutterstock.com)

Design to print

In the April 2025 issue of ISMR, we outline the benefits, challenges, growth forecasts and

Submitted by:

Sara Waddington

Ursula von der Leyen, President, European Commission

EU Action Plan on Steel and Metals

On 19 March 2025, the European Commission took action to maintain and expand European industrial

Submitted by:

Sara Waddington

FABTECH 2023

FABTECH show preview

Registration is now open for FABTECH 2025, North America’s largest event for metal forming, fabricating

Submitted by:

Sara Waddington

People standing around an F1 car

Subcon show preview

‘Subcon – The Manufacturing Solutions Show’ will be held in Hall 3A at the NEC

Submitted by:

Sara Waddington

TRUMPF Managing Board

A strategy for success

ISMR attended TRUMPF’s INTECH exhibition at its headquarters in Ditzingen, Germany. The company highlighted its

Submitted by:

Sara Waddington

Blechexpo Schweisstec 2025

Meet ISMR at Blechexpo/Schweisstec

Stuttgart, Germany, will be the venue for the 17th Blechexpo international trade fair for sheet

Submitted by:

Sara Waddington

Image: Tata Steel.

Made in the UK

We highlight forecasts, drivers and challenges for the UK economy and its manufacturers.

===

The

Submitted by:

Sara Waddington

Image: Gene Gallin, Unsplash.

Global shipbuilding markets

We analyse trends, growth patterns and drivers in global shipbuilding markets for manufacturers.

===

“The

Submitted by:

Sara Waddington

Dr Jan Antonis, InspecVision Ltd

A drive for innovation

InspecVision, a leading UK manufacturer of precision inspection systems for quality control, has achieved the

Submitted by:

Sara Waddington

Image: Oliver Bornhauser, Unsplash.

Global aerospace markets

We present selected analysis on prospects, challenges and opportunities in the global aerospace sector for

Submitted by:

Sara Waddington

Image: Tata Steel.

Made in the UK

We highlight forecasts, drivers and challenges for the UK economy and its manufacturers.

===

The

Submitted by:

Sara Waddington

FABTECH 2023

FABTECH show preview

Registration is now open for FABTECH 2025, North America’s largest event for metal forming, fabricating

Submitted by:

Sara Waddington

Dr Jan Antonis, InspecVision Ltd

A drive for innovation

InspecVision, a leading UK manufacturer of precision inspection systems for quality control, has achieved the

Submitted by:

Sara Waddington

IGEMS waterjet cutting software next to waterjet cutting system.

The water margin

The waterjet process is recognized as one of the most versatile and fastest-growing cutting processes

Submitted by:

Sara Waddington