Skip to main content

COVID-19 accelerates relocation of automotive production and job cuts

2nd September 2020

Submitted by:

Sara Waddington

Picture: VDA President, Hildegard Müller

According to the VDA (German Association of the Automotive Industry), half of all automotive suppliers do not expect to return to pre-crisis levels until 2022 and one tenth expect to do so in 2023. Moreover, it said, six out of ten suppliers also plan more job cuts owing to the COVID-19 crisis. These are the findings of a survey of supply firms by the German Association of the Automotive Industry (VDA).

“The corona crisis continues to have marked impact on supply companies in the automotive industry. Around two thirds of the firms surveyed by the VDA report capacity utilisation of only 50 to 75 per cent. But only around one quarter of suppliers have more than half of their staffers on short-time work,” it explained.

“Roughly 60 per cent of the companies report that they are planning to shed more staff owing to the corona crisis. Around half of these firms intend to cut five to ten per cent of their workforce. And about one third of all companies surveyed have plans to axe more than 10 per cent,” it continued.

Around 40 per cent of companies had already planned (before the corona crisis began) to relocate production to other countries as part of the transformation process. Over two thirds of them now indicate that these plans are being accelerated due to the corona crisis, explained the VDA.

“The political measures to support businesses are indeed taking effect. However, we now expect a longer period of difficulty. Most suppliers expect to return to pre-crisis levels starting in 2022 at the earliest,” added VDA President, Hildegard Müller. “We support the policy of extending relevant measures, such as the short-time work allowance. But the pressure to adapt remains high. Politicians, companies and trade unions must now work together and do everything they can to prevent production from being moved out of Germany and avert further jobs cuts due to corona.”

In addition, said the VDA, over 80 per cent of companies indicate that at present they can access sufficient sources of financing and that their banks are providing sufficient support. Twenty per cent of respondents had received assistance from the Economic Stabilisation Fund, and 10 per cent have made use of bridging schemes for small and mid-sized enterprises (SMEs) or are planning to do so. Around one fifth of companies (nearly 20 per cent) reported that, under the current conditions, their liquidity is secure for only two to three months at most unless they undertake greater adaptation measures.

“The economy will recover more quickly if no more additional burdens are introduced. That applies to taxes, bureaucracy and further climate policy regulations. Many of the suppliers surveyed who had already reduced their workforces before the corona pandemic did so for reasons such as their high costs and the transformation,” concluded VDA President, Hildegard Müller. 

“Policy-makers and society in general should use the corona crisis as an incentive to make reforms that relieve the burdens on the companies and thus strengthen Germany as a business location. In Germany, and in Europe, we need a proactive industrial policy committed to climate protection.”

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Ron Palick, Wilson Tool

Punch, bend and stamp

Ron Palick, Wilson Tool’s global VP of sales, outlined the company’s vision, product strategy and

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington

Dirk Ritter, STOPA

A holistic view

Dirk Ritter, STOPA’s head of sales and service, outlined the company’s closer alignment with TRUMPF

Submitted by:

Sara Waddington

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Ron Palick, Wilson Tool

Punch, bend and stamp

Ron Palick, Wilson Tool’s global VP of sales, outlined the company’s vision, product strategy and

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Ron Palick, Wilson Tool

Punch, bend and stamp

Ron Palick, Wilson Tool’s global VP of sales, outlined the company’s vision, product strategy and

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington

Dirk Ritter, STOPA

A holistic view

Dirk Ritter, STOPA’s head of sales and service, outlined the company’s closer alignment with TRUMPF

Submitted by:

Sara Waddington

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

Ron Palick, Wilson Tool

Punch, bend and stamp

Ron Palick, Wilson Tool’s global VP of sales, outlined the company’s vision, product strategy and

Submitted by:

Sara Waddington

Stanislav Demin, CEO, Aliko Oy

A flexible focus

Aliko’s CEO, Stanislav Demin, shared his vision and strategy for the company with ISMR, as

Submitted by:

Sara Waddington

SteelFab 2026

“Steeling” the show

Don’t miss the 21st SteelFab exhibition from 12-15 January 2026 in Sharjah, UAE. Show highlights

Submitted by:

Sara Waddington