Skip to main content

LAMIERA exhibition preview

29th March 2023

Submitted by:

Sara Waddington

LAMIERA, the international trade show centred on sheet-metal forming and cutting machines and related technologies will take place at fieramilano Rho in Milan, Italy, from 10-13 May 2023. The show organiser, CEU-CENTRO ESPOSIZIONI UCIMU, anticipates a sell-out show with around 350 exhibitors.

“LAMIERA is the only trade show in Italy specifically focused on the sheet-metal sector. It highlights the primary role played by the Italian metalforming industry worldwide, which is high up in the rankings for production, exports and consumption. This helps to increase the appeal of this event for operators in the international manufacturing industry,” commented UCIMU-SISTEMI PER PRODURRE, the Italian machine-tool, robots, automation systems and ancillary products (NC, tools, components and accessories) manufacturers' association.

In 2022, LAMIERA registered over 19,000 turnstile entries over the four days of the exhibition. Approximately 365 exhibitors in two halls supported the event, which covered a total exhibition surface area of over 40,000 square metres.

Six technological themes

Besides showcasing stand-alone machines and complex industrial equipment/software for sheet-metal forming and processing, the exhibition will focus on six technological themes that “are crucial for the production in the sector today.”

To read the rest of the article, see https://joom.ag/oR6d/p30

 

 

Forming simulations (image: Quintus Technologies).

Form and function

The acquisition of a third fluid cell press will boost capacity for PIMCO, enabling the

Submitted by:

Sara Waddington

Image: Shutterstock.com

Global research project update

ISMR outlines a selection of the latest global research projects for metal forming and fabrication

Submitted by:

Sara Waddington

Image: Fagor Arrasate press

Making an impression

Read an alphabetical selection of the latest new stamping, tooling, hydroforming and deep drawing innovations

Submitted by:

Sara Waddington

Image: Gene Gallin, Unsplash.

Global shipbuilding markets

We analyse trends, growth patterns and drivers in global shipbuilding markets for manufacturers.

===

“The

Submitted by:

Sara Waddington

Dr Jan Antonis, InspecVision Ltd

A drive for innovation

InspecVision, a leading UK manufacturer of precision inspection systems for quality control, has achieved the

Submitted by:

Sara Waddington

TRUMPF Managing Board

A strategy for success

ISMR attended TRUMPF’s INTECH exhibition at its headquarters in Ditzingen, Germany. The company highlighted its

Submitted by:

Sara Waddington

Forming simulations (image: Quintus Technologies).

Form and function

The acquisition of a third fluid cell press will boost capacity for PIMCO, enabling the

Submitted by:

Sara Waddington

Image: Fagor Arrasate press

Making an impression

Read an alphabetical selection of the latest new stamping, tooling, hydroforming and deep drawing innovations

Submitted by:

Sara Waddington

Blechexpo Schweisstec 2025

Meet ISMR at Blechexpo/Schweisstec

Stuttgart, Germany, will be the venue for the 17th Blechexpo international trade fair for sheet

Submitted by:

Sara Waddington

Riccardo Rosa, President of UCIMU

Made in Italy

Manufacturing prospects, machine tool trends and macro-economic forecasts for Italy are outlined in this article

Submitted by:

Sara Waddington

AM-manufactured part (Shutterstock.com)

Design to print

In the April 2025 issue of ISMR, we outline the benefits, challenges, growth forecasts and

Submitted by:

Sara Waddington

UK Metals Expo 2024

UK Metals Expo show preview

We preview the UK Metals Expo, which is due to take place at the NEC

Submitted by:

Sara Waddington

FABTECH 2023

FABTECH show preview

Registration is now open for FABTECH 2025, North America’s largest event for metal forming, fabricating

Submitted by:

Sara Waddington

People standing around an F1 car

Subcon show preview

‘Subcon – The Manufacturing Solutions Show’ will be held in Hall 3A at the NEC

Submitted by:

Sara Waddington

TRUMPF Managing Board

A strategy for success

ISMR attended TRUMPF’s INTECH exhibition at its headquarters in Ditzingen, Germany. The company highlighted its

Submitted by:

Sara Waddington

Blechexpo Schweisstec 2025

Meet ISMR at Blechexpo/Schweisstec

Stuttgart, Germany, will be the venue for the 17th Blechexpo international trade fair for sheet

Submitted by:

Sara Waddington

Image: Shutterstock.com

Global research project update

ISMR outlines a selection of the latest global research projects for metal forming and fabrication

Submitted by:

Sara Waddington

UK Metals Expo 2024

UK Metals Expo show preview

We preview the UK Metals Expo, which is due to take place at the NEC

Submitted by:

Sara Waddington

Image: Fagor Arrasate press

Making an impression

Read an alphabetical selection of the latest new stamping, tooling, hydroforming and deep drawing innovations

Submitted by:

Sara Waddington

Image: Tata Steel.

Made in the UK

We highlight forecasts, drivers and challenges for the UK economy and its manufacturers.

===

The

Submitted by:

Sara Waddington

Image: Gene Gallin, Unsplash.

Global shipbuilding markets

We analyse trends, growth patterns and drivers in global shipbuilding markets for manufacturers.

===

“The

Submitted by:

Sara Waddington

Dr Jan Antonis, InspecVision Ltd

A drive for innovation

InspecVision, a leading UK manufacturer of precision inspection systems for quality control, has achieved the

Submitted by:

Sara Waddington

Forming simulations (image: Quintus Technologies).

Form and function

The acquisition of a third fluid cell press will boost capacity for PIMCO, enabling the

Submitted by:

Sara Waddington

Image: Shutterstock.com

Global research project update

ISMR outlines a selection of the latest global research projects for metal forming and fabrication

Submitted by:

Sara Waddington

UK Metals Expo 2024

UK Metals Expo show preview

We preview the UK Metals Expo, which is due to take place at the NEC

Submitted by:

Sara Waddington

Image: Fagor Arrasate press

Making an impression

Read an alphabetical selection of the latest new stamping, tooling, hydroforming and deep drawing innovations

Submitted by:

Sara Waddington

Image: Tata Steel.

Made in the UK

We highlight forecasts, drivers and challenges for the UK economy and its manufacturers.

===

The

Submitted by:

Sara Waddington

FABTECH 2023

FABTECH show preview

Registration is now open for FABTECH 2025, North America’s largest event for metal forming, fabricating

Submitted by:

Sara Waddington