Skip to main content

Europe’s largest mesocosm nears completion

27th July 2018

Submitted by:

Sara Waddington

Building work on Fera Science Limited’s new mesocosm testing facility is nearing completion in Sand Hutton, near York, UK. The E-Flows mesocosm is a groundbreaking project developed in partnership by Fera (formerly the Food and Environment Research Agency), the Centre for Crop Health and Protection (CHAP) and supported by Innovative UK. It has been designed, developed and will be managed and operated by Fera for use by the agri-tech industry and researchers.

Launching in summer 2018, the outdoor experimental system will perform simulations of natural aquatic environments under controlled conditions. As plant protection products such as pesticides are developed, manufacturers will use the mesocosm to demonstrate that their products are safe for aquatic environments as part of higher tier testing.

In October 2017, work commenced on a 40m-deep borehole which, when operational, will feed clean water into five one-metre deep lagoons. Filled with invertebrate life and plants, the lagoons naturalise the water, before distributing it across a series of 30 rushes, simulating the drainage on farmland. Each of the rushes comprises two 10m lengths, through which naturalised water will flow. During testing, they will feature the relevant protection products. 

The majority of existing mesocosm facilities are static or simply recirculate water, Fera says. However, this is not representative of what actually happens in a natural environment, where fresh water is constantly flowing in streams and ditches. To overcome this, the mesocosm is supplied with a continuous flow-through of aged, fresh water.

Once the water has been tested and it has passed through the rushes, it must then be purified before it can be re-introduced into the surrounding environment. A three-pump recycling system has been installed onsite at the Yorkshire facility to undertake this activity. Storage tanks in the recycling system collect water before it is passed through granulate activated carbon filters. Any chemicals in the water will be filtered out and collected by the carbon, before being re-introduced into the local environment. 

“As building works completes, Fera is one step closer to launching Europe’s most advanced, fully flow-through mesocosm,” said Peter Gilbertson, special projects manager at Fera. “This ground-breaking facility will drive a new era of research that will allow testing under a variety of conditions that we were just unable to do before.”
 

ISMR Dec 2025/Jan 2026 issue out now

Read the latest issue of ISMR

Happy New Year from ISMR! Please accept all our best wishes for 2026!

The December

Submitted by:

Sara Waddington

L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product manager for plate) at Blechexpo/Schweisstec.

A steel evolution

(Image: L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product

Submitted by:

Sara Waddington

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools

A connected future

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools, discussed the company’s latest

Submitted by:

Sara Waddington

The Penn Elcom team in front of its new robotised bending cell.

A bending philosophy

(Image: The Penn Elcom team in front of its new robotised bending cell.)

Penn Elcom

Submitted by:

Sara Waddington

Robot monitoring (image: Shutterstock.com).

A digital flow

Enterprise Resource Planning (ERP) systems have become indispensable for businesses looking to stay competitive in

Submitted by:

Sara Waddington

ISMR Dec 2025/Jan 2026 issue out now

Read the latest issue of ISMR

Happy New Year from ISMR! Please accept all our best wishes for 2026!

The December

Submitted by:

Sara Waddington

L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product manager for plate) at Blechexpo/Schweisstec.

A steel evolution

(Image: L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product

Submitted by:

Sara Waddington

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools

A connected future

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools, discussed the company’s latest

Submitted by:

Sara Waddington

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

ISMR Dec 2025/Jan 2026 issue out now

Read the latest issue of ISMR

Happy New Year from ISMR! Please accept all our best wishes for 2026!

The December

Submitted by:

Sara Waddington

L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product manager for plate) at Blechexpo/Schweisstec.

A steel evolution

(Image: L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product

Submitted by:

Sara Waddington

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools

A connected future

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools, discussed the company’s latest

Submitted by:

Sara Waddington

ISMR team at Blechexpo/Schweisstec 2025

Blechexpo/Schweisstec in Stuttgart

1190 exhibitors from 41 countries met 40,072 visitors at the Blechexpo/Schweisstec sheet metal and joining

Submitted by:

Sara Waddington

the partnership principle

The partnership principle

ISMR sat down with CIDAN’s engineering manager, Haval Othman (pictured on the left), and its

Submitted by:

Sara Waddington

ISMR Dec 2025/Jan 2026 issue out now

Read the latest issue of ISMR

Happy New Year from ISMR! Please accept all our best wishes for 2026!

The December

Submitted by:

Sara Waddington

L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product manager for plate) at Blechexpo/Schweisstec.

A steel evolution

(Image: L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product

Submitted by:

Sara Waddington

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools

A connected future

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools, discussed the company’s latest

Submitted by:

Sara Waddington

Construction markets (image: Shutterstock)

Global construction market trends

(Image: Shutterstock.com)

Trends, growth drivers, challenges, economic forecasts and selected analysis for the global construction

Submitted by:

Sara Waddington

Aerial view of Dubai (Shutterstock)

Steel fabrication in GCC markets

(Image: Aerial view of Dubai - @Shutterstock)

We highlight selected growth prospects, opportunities and selected

Submitted by:

Sara Waddington

Robot monitoring (image: Shutterstock.com).

A digital flow

Enterprise Resource Planning (ERP) systems have become indispensable for businesses looking to stay competitive in

Submitted by:

Sara Waddington

ISMR Dec 2025/Jan 2026 issue out now

Read the latest issue of ISMR

Happy New Year from ISMR! Please accept all our best wishes for 2026!

The December

Submitted by:

Sara Waddington

L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product manager for plate) at Blechexpo/Schweisstec.

A steel evolution

(Image: L-R: Thomas Krone (Voortman’s business development and marketing director) and Stef Rohaan (Voortman’s product

Submitted by:

Sara Waddington

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools

A connected future

Marcella Montelatici, Managing Director of Sales and Service, TRUMPF Machine Tools, discussed the company’s latest

Submitted by:

Sara Waddington

The Penn Elcom team in front of its new robotised bending cell.

A bending philosophy

(Image: The Penn Elcom team in front of its new robotised bending cell.)

Penn Elcom

Submitted by:

Sara Waddington

Robot monitoring (image: Shutterstock.com).

A digital flow

Enterprise Resource Planning (ERP) systems have become indispensable for businesses looking to stay competitive in

Submitted by:

Sara Waddington